Get Navio2 with 15% Discount

Great news for all our users out there! Order Navio2 until May 31 and get a 15% discount. There are various ways to make use of Navio2. Remember a great number of new devices and robots created by our users? All of them have one thing in common – they are powered by a Navio2 board. To get the discount, use coupon code...

Continue reading

Craft Time: Get Creative with Navio2

Some people like the out-of-box solutions that work immediately after the unpacking. But some people prefer to create and assemble things themselves. For the engineering fans, we have Navio2 which is an autopilot for Raspberry Pi, powered by ArduPilot. Navio2 is equipped with a GNSS receiver for tracking GPS, Galileo,...

Continue reading

New Image for Navio2 with RPi 3 B+ Support and More Exciting Features

We’ve rolled out our new Raspbian Stretch image for Navio! Here’s the list of new features: Raspberry PI 3 Model B+ support is here! Exciting new GPIO support on the servo rail. Essentially it means that you have 14 GPIOs more to spare. ArduPilot updates: ArduCopter-3.5.5 ArduPlane-3.8.5 APMRover-3.3.0 Kernel...

Continue reading

Building an Autonomous Car with RPi and Navio2 Running Donkey

Autonomous cars are an application of Artificial Intelligence that is gaining a lot of interest lately—from auto manufacturers, research institutions and universities. The DIY community has recently stepped up their game with open source libraries and software that allow hobbyists to easily build small-scale autonomous...

Continue reading

Raspbian update and ArduCopter beta

Hi there! We wanted to share with you some good news about the updates we’d been working on for a while. Raspbian updates boil down to Support for Raspberry Pi Camera v2.1 and a udev rule for rootless access to one Ardupilot packages are on our servers from now on Ardupilot upgrade is way easier now. There’s no need...

Continue reading

Raspberry Pi 3 support for Navio is here!

For the last weeks we’ve been working relentlessly on the new revision of our special Raspbian image for Navio autopilot that supports Raspberry Pi 3. The new image works on the following hardware combinations: Raspberry Pi 3 with Navio2 Raspberry Pi 3 with Navio+ Raspberry Pi 2 with Navio2 Raspberry...

Continue reading

Navio2 and Reach are back in stock!

Today we have dispatched a record amount of parcels, exceeding even our crowdfunding campaign volumes! Long awaited Reach RTK kits are already on their way to our customers and tomorrow they will be followed by an even bigger number of Navio2 backorders. We are happy to announce that from this moment all our products...

Continue reading

Community-designed Cases for Navio+ and Raspberry Pi 2

Recently several cases were designed for Navio+ and Raspberry Pi 2 by community members and we would like to share them in one blog post. Now you have what to choose from. We would also like to thank designers for their great work. So pick one you like and make sure to share the results with us! Having a flat bottom...

Continue reading

Navio+ Linux Board with APM:Copter 3.3 by Randy Mackay

Randy Mackay, APM:Copter developer wrote an overview of his experience with Navio+ on DIYDrones and made  this amazing demo video. Thank you Randy for taking time to do this, and for all the great work on Copter development. To read the full post proceed here.

Continue reading

Navio+ Back in Stock!

Today we have shipped all backorders and Navio+ boards are now in stock! Thank you for your patience and understanding, several holidays had affected manufacturing and delivery times for this batch. When you receive Navio+ make sure to share your project at community.emlid.com!

Continue reading